Ключевые слова: vehicle applications, SMES, grid operation, dc performance, stability, charging characteristics, high rate process, control systems
Rindfleisch M., Morawski A., Hossain M.S., Patel D., Cetner T., Yamauchi Y., Liang H., Taylor R., Billah M.M.
Hossain M.A., Alam M.A., Alam M.S., Abido M.A., Alotaibi M.A., Shafiullah M., Al-Ismail F.S., Rashid M.M.
Ключевые слова: renewable energy systems, control systems, frequency dependence, SMES, dynamic operation, modeling
Hossain M.S., Rindfleisch M.A., Gajda D., Zaleski A.J., Gajda G., Morawski A.J., Babij M., Szymaґnski D.
Hossain M.S., Rindfleisch M.A., Gajda D., Zaleski A.J., Gajda G., Shahbazi M., Morawski A.J., Babij M., Szymanski D.
Nenkov K., Rindfleisch M., Hossain M.S., Gajda D., Zaleski A.J., Malecka M., Czujko T., Morawski A.J.
Kim S., Kumakura H., Matsumoto A., Kim J.H., Choi S., Maeda M., Patel D., Hossain M.S.A., Yamauchi Y., Liang H.
Ключевые слова: MgB2/Ti/Cu, wires, PIT process, in-situ process, microstructure, X-ray diffraction, critical caracteristics, Jc/B curves, experimental results
Huhne R., Sparing M., Cherif C., Hossain M., Abdkader A., Espenhahn T., Nielsch K., Wunderwald F., Moller M., Fuchs M.H.
Ключевые слова: bearing magnetic, rotating machines, stiffness, dynamic operation, aspect ratios, HTS, YBCO, bulk, rings, levitation performance, geometry effects, experimental results, displacements
Ключевые слова: MgB2, tapes monofilamentary, in-situ process, fabrication, critical caracteristics, critical current density, n-value, anisotropy, irreversibility fields, doping effect, temperature dependence, angular dependence, Jc/B curves, magnetic field dependence, microstructure, composition, experimental results
Ключевые слова: MgB2, wires multifilamentary, coils, design, pinning mechanism, critical caracteristics, pinning centers, temperature dependence, microstructure, critical temperature, irreversibility fields, annealing process, Jc/B curves, pressure dependence, temperature dependence, experimental results
Ключевые слова: MRI magnets, MgB2, fabrication, sintering, in-situ process, diffusion process, comparison, joints superconducting , wires multifilamentary, wires monofilamentary, critical caracteristics, Jc/B curves, heat treatment, n-value, microstructure, lattice parameter, X-ray diffraction, experimental results
Kim J.H., Choi H., Dou S.X., Nijhuis A., Hossain M.S., Khan A., Mustapic M., Jie H., Luzin V., Yamauchi Y., Zaman M., Abdulsalam A.V., Chae K.H., Levchenko V.
Ключевые слова: fusion magnets, MgB2, isotope, bulk, fabrication, wires multifilamentary, X-ray diffraction, microstructure, critical caracteristics, Jc/B curves
Flukiger R., Kim J.H., Senatore C., Hossain M.S., Khan A., Gajda D., Patel D., Mustapic M., Yamauchi Y., Morawski A.J.
Laan D.C., Haugan T.J., Weiss J.D., Hossain M.S.A., Gao P., Yagotintsev K., Anvar V.A., Dhalle M.J., Nijhuis M.S.
Ключевые слова: fusion magnets, LTS, Nb3Sn, cable-in-conduit conductor, ac losses, contact characteristics, resistance, experimental results, numerical analysis
Ключевые слова: bearing magnetic, textile machines, bulk, rings, design, experimental results
Hossain M.S., Shahabuddin M., Khan A., Alzayed N.S., Parakkandy J.M., Madhar N.A., Alghamdi F.S., Khan M.A.
Ключевые слова: MgB2, bulk, fabrication, nanoscaled effects, carbon nanotubes, doping effect, composites, milling process, X-ray diffraction, lattice parameter, microstructure, resistivity, temperature dependence, critical caracteristics, Jc/B curves, pinning force, experimental results, substitution
Li H., Liu Y., Hossain M.S., Liu C., Li C., Ma Z., Yu L., Cheng F., GUO Q., Yamauchi Y., Bando Y., Alghamdi Y.G., Alshehri A.A.
Ключевые слова: MgB2, bulk, powder processing, precursors, microstructure, phase formation, X-ray diffraction, lattice parameter, critical caracteristics, Jc/B curves, fabrication
Tomsic M., Kim J.H., Choi S., Dou S.X., Xu J., Hossain M.S., Shahabuddin M., Gajda D., Ma Z., Patel D., Mustapic M., Qiu W., Knott J.C., Yamauchi Y.
Laan D.C., Haugan T.J., Nijhuis A., Hossain M.S., Weiss J.D., Thomas R.J., Yagotintsev K.A., Ilin K., Anvar V.A., Monachan B., Ashok K.B., Kortman B.A., Pellen B., Prakash M.J.
Ключевые слова: bearing magnetic, textile machines
Kim J., Nijhuis A., Hossain M.S., Gajda D., Qiu W., Jie H., Luzin V., Yamauchi Y., Bando Y., Anvar V.A.
Ключевые слова: MgB2, isotope, wires, mechanical properties, stress effects, texture, neutron diffraction, microstructure, fabrication, PIT process, experimental results
Ключевые слова: MgB2, wires, diffusion method, densification, fabrication
Kim J.H., Rindfleisch M., Yanmaz E., Morawski A., Hossain M.S., Shahabuddin M., Gajda D., Ma Z., Patel D., Mustapic M., Cetner T., Qiu W., Jie H., Billah M.
Ключевые слова: MgB2, wires, cold pressing, densification, hot isostatic pressing, fabrication, microstructure, critical caracteristics, Jc/B curves
Kim J.H., Li H., Yanmaz E., Devred A., Liu Y., Hossain M.S., Gajda D., Ma Z., Patel D., Cai Q., Qiu W., Somer M., GUO Q., Jie H., Luzin V., Yamauchi Y., Fatehmulla A., Farooq W.A., Bando Y., Pradhan S.*10
Ключевые слова: MgB2, bulk, magnetization, microstructure, critical caracteristics, Jc/B curves
Schultz L., Fuchs G., Unger R., Sparing M., Berger A., Cherif C., Hossain M., Abdkader A., Telke C., Nocke A., Beitelschmidt M.
Ключевые слова: bearing magnetic, modeling, numerical analysis, dynamic operation
Yanmaz E., Kim J.-H., Shahabuddin M., Ma Z., Pradhan S., Patel D., Kumar N., Qiu W., Kundu A., Jie H., Panchal A.G., Hossain M.D.
Li H., Liu Y., Hossain M.S., Liu C., Ma Z., Cheng F., Yamauchi Y., Fatehmulla A., Farooq W.A., Bando Y.
Ключевые слова: rotating machines, generators, wind farms application, FCL resistive, stability, modeling
Tomsic M., Kim J.H., Choi S., Dou S.X., Rindfleisch M., Hong J., Kobayashi H., Maeda M., Hossain M.S., Shahabuddin M., Ma Z., Patel D., See K.W., Kim S.J., Park J.Y., Qiu W.
Schultz L., Fuchs G., Berger D., Sparing M., Berger A., Cherif C., Hossain M., Abdkader A., Lux V., Hameister S., Wall F.
Ключевые слова: bearing magnetic, rotating characteristics, cryostat, HTS, YBCO, bulk, rings, displacements, oscillation, experimental results, levitation performance, dynamic operation
Ключевые слова: cryogenic systems, cryostat, design parameters, fabrication, cooling technology, experimental results, YBCO, HTS, bearing magnetic, rings, bulk
Ключевые слова: MgB2, fabrication, sintering, doping effect, magnetization, critical caracteristics, Jc/B curves, composition, microstructure, pinning force
Tomsic M., Kim J.H., Choi S., Yanmaz E., Maeda M., Hossain M.S., Shahabuddin M., Pradhan S., Patel D.
Ключевые слова: MgB2, bulk, sintering, critical caracteristics, microstructure, Jc/B curves, pinning force, experimental results, fabrication
Tomsic M., HaBler W., Nenkov K., Morawski A., Hossain M.S., Rindfleisch M.A., Gajda D., Zaleski A.J., Maіecka M.
Ключевые слова: MgB2/Nb, nanodoping, wires multifilamentary, hot isostatic pressing, dislocations, density, homogeneity, distribution, pinning, microstructure, upper critical fields, irreversibility fields, critical caracteristics, Jc/B curves, phase diagram, pinning force, critical current density, temperature dependence
Ключевые слова: MgB2, bulk, doping effect, fabrication, microstructure, magnetization, temperature dependence, critical caracteristics, Jc/B curves, experimental results
Ключевые слова: wind farms application, modeling, grid operation, FCL resistive, dc reactor
Kim J.H., Hossain M.S., Shahabuddin M., Ma Z., Patel D., Mustapic M., Shah M.S., Barua S., Parakkandy J.M., Alzayed N.
Ключевые слова: bearing magnetic, twisting, textile machines, HTS, YBCO, levitation performance, bulk, rings, experimental results
HaBler W., Nenkov K., Morawski A., Hossain M.S., Rindfleisch M.A., Gajda D., Zaleski A.J., Cetner T., Czujko T., Zuchowska E., Gajda G.
Ключевые слова: MgB2/Fe, PIT process, hot isostatic pressing, in-situ process, barriers, ex-situ process, wires, tapes, mechanical treatment, fabrication, critical caracteristics, microstructure, Jc/B curves, pinning force, resistive transition, resistivity, temperature distribution, critical temperature, irreversibility fields, n-value, experimental results
Dou S.X., Morawski A., Hossain M.S., Ma Z., Patel D., Mustapic M., Cetner T., Barua S., Acar S., Somer M., Kokal I., Gajdae D.
Ключевые слова: MgB2, fabrication, precursors, sintering, doping effect, lattice parameter, microstructure, magnetization, critical caracteristics, Jc/B curves
Schultz L., Fuchs G., Berger D., Sparing M., Berger A., Cherif C., Hossain M., Abdkader A., Lux V., Hameister S., Wall F.
Ключевые слова: HTS, YBCO, rings, modeling, textile machines, rotating machines, bearing magnetic, levitation performance, dynamic operation
Ключевые слова: MgB2/Nb/Cu, MgB2/Nb/Monel, wires multifilamentary, resistance, defects, barriers, microstructure, resistive transition, experimental results, new, damage mechanisms
Kim J.H., Choi S., Oh S., Maeda M., Hossain M.S., Shahabuddin M., Alzayed N.S., Motaman A., Shah M.S.
Kim J.H., Choi S., Oh S., Maeda M., Shahabuddin M., Hata S., Shimada Y., Alzayed N.S., Al Hossain M.S.
Ключевые слова: Jc/B curves, upper critical fields, irreversibility fields, MgB2/Fe, PIT process, in-situ process, fabrication, wires, X-ray diffraction, lattice parameter, microstructure, resistive transition, resistivity, temperature dependence, heat treatment, magnetic field dependence, critical caracteristics, critical current
Ключевые слова: MgB2/Nb/Monel, wires, critical caracteristics, microstructure, n-value, Jc/B curves, temperature dependence, experimental results
Kovac P., Melisek T., Goldacker W., Tomsic M., Kim J.H., Dou S.X., Rindfleisch M., Kopera L., Maeda M., Ringsdorf B., Hossain M.S., Jung A., Patel D., Kario A., Runtsch B., Mustapic M., Cicek O., Motaman A., Barua S.
Ключевые слова: MgB2, wires, CTFF process, critical current, Jc/B curves, doping effect, n-value, joints
Goldacker W., Rindfleisch M., Kim J.-H., Ringsdorf B., Hossain M.S., Jung A., Patel D., Kario A., Runtsch B., Motaman A., Barua S., Gazder A.A., Dou S.-X.
Ключевые слова: MgB2, bulk, powder processing, precursors, nanodoping, nanoscaled effects, fabrication, microstructure, critical caracteristics, Jc/B curves, composition, lattice parameter
Ключевые слова: MgB2, wires, ac losses, magnetization, temperature dependence, numerical analysis
Ключевые слова: MgB2, bulk, fabrication, precursors, nanoscaled effects, critical current, critical current density, heat treatment, Jc/B curves, pinning, magnetization curves
Ключевые слова: MgB2, bulk, doping effect, microstructure, grain size, lattice parameter, pinning, critical caracteristics, Jc/B curves, pinning force, experimental results
Ключевые слова: MgB2, alloying effects, in-situ process, fabrication, wires, tapes, densification, critical caracteristics, magnetic properties, pressure effect, Jc/B curves, resistive transition, resistivity, temperature dependence, pinning force, irreversibility fields, experimental results, cold pressing
Ключевые слова: MgB2, bulk, sintering, fabrication, upper critical fields, irreversibility fields, critical caracteristics, magnetic properties
Xu X., Kim J.H., Dou S.X., Wang X.L., Hossain M.S.(msah853@uow.edu.au), Peleckis G.
Xu X., Choi S., Dou S.X., Yeoh W.K., Shi D.Q., Hossain M.S., Kim J.H.(jhk@uow.edu.au), Wang J.L., Kiyoshi S.C.
Ключевые слова: MgB2/Fe, PIT process, wires, heat treatment, Jc/B curves, critical caracteristics, fabrication
Xu X., Kumakura H., Dou S.X., Shi D.Q., Nakane T., Hossain M.S., Kim J.H.(jhk@uow.edu.au), Wang J.L.
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.